Beko Dishwasher Heaters

Beko Dishwasher Heaters

Beko dishwasher heaters are the parts that heat the water to the right temperature for cleaning and drying. They make sure detergent dissolves and your dishes come out spotless and sanitised. Over time the heater can fail and you may experience poor cleaning or cold washes.

When You Need To Replace Your Beko Dishwasher Heater

• Dishes Not Drying: If your dishes are still wet after the cycle the heater may not be working.
• Cold Water During Wash Cycles: A faulty heater can cause cold water to run during the wash cycles.
• Error Codes on Display: Some Beko dishwashers will display specific error codes for a heater failure.
• Burnt Smell or Visible Damage: A blown heater element may show signs of discolouration or have an unusual smell.

Beko Dishwasher Heaters

1. Flow-Through Heaters: These heat the water as it flows through the system, energy efficient and fast heating.
2. Tub or Base Heating Elements: Located at the bottom of the dishwasher, these elements heat the water in the tub during the cycle.

How to Replace Beko Dishwasher Heater

1. Turn Off Power and Water: Unplug the dishwasher and turn off the water supply.
2. Access the Heater: Depending on the model you may need to remove the bottom panel or access the element through the tub.
3. Disconnect Wires and Mounts: Carefully remove any wires and mounting brackets holding the heater.
4. Install New Heater: Place the new heater in position, reconnect the wires and secure it.
5. Test the Dishwasher: Replug and run a short cycle to check the heating is working.

How to Choose Beko Dishwasher Heater

• OEM or Aftermarket: OEM (Original Equipment Manufacturer) heaters will fit perfectly and last longer, aftermarket may save you money.
• Model Compatibility: Always check the heater is compatible with your model to avoid installation problems.
• Material: Look for corrosion resistant and high temperature tolerant materials for durability.

Tips to Prolong Heater Life

• Use the Right Detergent: Harsh detergents can deposit minerals on the heating element and reduce performance.
• Descaling: Hard water can deposit on the heater so descale regularly.
• Don’t Overload: Overloading the dishwasher can block water flow and reduce heating.

Maintain your Beko dishwasher and replace your heater on time and your appliance will run smoothly and your dishes will be spotless and dry.